We also offer the RSP1/M, which is similar to the LRM1 but is designed with an M4 tapped hole for mounting.Is there a specification for tip/tilt of a mounted element during a 360° rotation? You may use the LRM1 along with our LMR1/M to get the ability to mount with an M4 tap. External SM1 or SM2 Threading for Compatibility with Ø1" or Ø2" Lens Tubes Thorlabs' Achromatic Fiber Collimators with adjustable focus are designed with an effective focal length (EFL) of 20 mm, 40 mm, or 80 mm.


If you could contact techsupport directly with details of your set up (mass and momentum) we could may be replicate and test this for you.Please provide/contact me for spec if mounted vertically. The center aperture accepts Ø1/2" optics up to 0.23" thick (5.8 mm), held in place with a The RSP1(/M) Continuous Rotation Mount utilizes two precision bearings for smooth, backlash-free rotation.

An 8-32 to 6-32 thread adapter is included with imperial stages for use with the PM3 and PM4 clamping arms sold below. Thorlabs offers a wide variety of manual and motorized rotation mounts and stages. An item that has been used previously.
The mount can be locked into position using the 0.035" hex setscrew on the outer edge.The LRM1 is a lockable, continuous-rotation mount for Ø1" optics. Performance will likely come down to what load needs to be mounted.Hello! When the rotation is locked, the double bore on the mount maintains a stable, three-point contact to hold the optic carriage.The DLM1 mount is designed to put the optic axis 1.00" above the top of the post. I hope to connect another SM1 threaded mount on the back side. For example, the zero of the engraved scale can be aligned with the fast axis of a The RSP2(/M) Continuous Rotation Mount utilizes two precision bearings for smooth rotation. A 360° laser-engraved scale marked at 2° increments allows for precise, repeatable positioning and fine angular adjustment. I will reach out to you directly to discuss our custom capabilities. I will get in touch directly to help with this issue. See the seller’s listing for full details and description of any imperfections. The dual rotation mount is ideal for creating variable polarizers and attenuators by mounting linear polarizers and wave plates in close proximity without having to align the optic axes of two separate rotation mounts. Linear Translation Stages: 1/4" (6 mm) or Less Thorlabs' wide selection of translation stages includes these compact short-travel translation stages, which have travel lengths of 1.5, 5, and 6 mm and are easily XYZ configurable. Therefore it will not be possible for you to modify this stage.I was wondering why not adding, on the top of the TTR001/M, a "coarse" rotation stage. Round For applications that require rotation in discrete increments, we offer the RSP1X15(/M) and RSP1X225(/M) mounts for Ø1" optics. A 360° laser-engraved scale marked at 2° increments allows for precise, repeatable positioning and fine angular adjustment. However, we do have the RSP2 which you can use with a SM2A11 adapter and SM30L05 to mount a Ø30mm optic.Wave plate and polarizer links have been added to the related items tab. Thorlabs' manual translation stages are offered in a range of maximum travel distances, from less than 1/4" (6 mm) to 2" (50 mm) and longer for our long travel, large area platforms. If you reside in an EU member state besides UK, import VAT on this purchase is not recoverable. The LRM1 features the same 3 mm long external SM1 thread as our standard SM1 lens tubes.

Rotation Mount and Stage Selection Guide. External SM1 threads (1.035"-40) allow the mount to be threaded directly onto any internally SM1-threaded device such as The knurled edge of the CRM05 and the 360° laser-engraved scale marked at 2° increments allow for precise, repeatable positioning and fine angular adjustment. A setscrew with a 0.05" (1.3 mm) hex is located on top for locking the rotational position. A top-located setscrew can be tightened with a 5/64" (2.0 mm) hex key or balldriver to lock the rotation of the mount.The RSP1D(/M) Ø1" Continuous Rotation Mount offers the same features as the RSP1(/M) featured above but also incorporates a rotatable dial that can be used, for example, to align a wave plate's optical axis after mounting. In this manner, a standard ruler or micrometer can become a precision tool.The 0 on the vernier scale is the "pointer" (marked by a red arrow in Figs. Seller assumes all responsibility for this listing. Thank you!Response from Bweh at Thorlabs USA: Thanks for your kind words and thanks for the suggestion. Optical tables, lasers, components and other equipment are refurbed and warranted.

A convenient top-located setscrew can be tightened with a 0.05" (1.3 mm) hex key or balldriver to secure the rotational position of the mount.The RSP1X15(/M) and RSP1X225(/M) rotation mounts for Ø1" optics feature both continuous 360° rotation and stepped rotation in increments of 15° for the RSP1X15(/M) or 22.5° for the RSP1X225(/M). It's a very straightforward way of increasing the precision of a measurement tool. The mounting hole has a depth of 0.09" (2.3 mm); caution should be taken in choosing a setscrew with the correct length, as damage to the part can occur.Mini-Series Rotation Mount for Ø1/2" (Ø12.7 mm) Optics, M3 Mounting StudMini-Series Rotation Mount for Ø1/2" (Ø12.7 mm) Optics, 4-40 Mounting Stud